Email:Louis@lithmachine.com
ItemNo :
DM-SHMAMOQ :
1Lead Date :
15 daysWarranty:
2yearsDelivery Time:
5 daysEmail :
Louis@lithmachine.comRoll to Roll Small Hot-melt Adhesive Coater
Equipment introduction
Small hot melt adhesive coater is suitable for roll to roll material coating, film covering and integrated automatic production hot melt adhesive coater. It is suitable for coating PET, cloth, paper, aluminum film, copper film and other roll packaging materials. The machine is designed with the advantages of full-automatic control, one button automatic tension control, automatic coating, automatic temperature constant, automatic film covering, automatic winding, etc.
Specification
|
Control system |
Integrated key panel |
|
Coating method |
Roll to roll |
|
Apply wide width |
120mm（10-120mm） |
|
Coating head |
Extrusion type (thermostat/constant temperature) |
|
Molten cylinder capacity |
1KG (Temperature adjustment/constant temperature) |
|
Retracting and retracting bracket |
Manual expansion shaft |
|
Discharge winding diameter |
380MM |
|
Winding diameter |
380MM |
|
Film coated coil diameter |
380MM |
|
Lamination station |
Automatic film coating |
|
Tension control |
Fully automatic constant pressure |
|
Temperature control |
Room temperature ~220 degrees |
|
Air pressure |
07mpa |
|
Motor control |
Variable frequency motor |
|
Speed |
1-10 m/min |
|
Power supply |
220V 50Hz |
|
Power |
1000w |
|
Dimension |
1500*620*1380mm(LWH) |
|
Warranty scope |
One year warranty for the whole machine (non-man-made and natural disasters) |
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damaged part for you for free.
DELIVERY TIME:15-20 days after confirming the order, detail delivery date should be decided according to
production season and order quantity.
This coater coats cotton fabric with beeswax oil, etc., and forms environmentally friendly packaging paper after curing in a drying oven.
This coating machine is suitable for all kinds of paper/cloth/leather/PET/aluminum foil/copper foil, etc.
It is applicable to the precise coating production of high thermal conductivity graphene heat conduction film and graphene heat conduction film in the fields of smart phones, tablet computers, smart VR, planetary circuits, electrothermal painting, floor heating film, etc.
It is applicable to the precise coating production of high thermal conductivity graphene heat conduction film and graphene heat conduction film in the fields of smart phones, tablet computers, smart VR, planetary circuits, electrothermal painting, floor heating film, etc.
The gel layer on the whitening tooth paste is dry and can produce high adhesion when fused with saliva water. It can remain attached to the teeth for a long time.
Application range of water-based adhesive coating machine: suitable for non-elastic materials such as paper, film, aluminum foil, plastic, non-woven fabric, etc.
The comma scraper coating is for adhesive tape coating, and the reticular pattern coating is for silicone oil coating. It is widely used in the production of aluminum foil tape, kraft paper tape, BOPP tape, release paper, release film and other coating products.
It is widely used in the production of release film coated with silicone oil.
Subscribe to us
ONLINE
Louis@lithmachine.com
+0086 15959378975
