Email:Louis@lithmachine.com
MOQ :
1Delivery Time:
5 daysEmail :
Louis@lithmachine.com
A rotary evaporator is a device used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation. The process of rotary evaporation is most often used to separate solvents with low boiling points, such a n-hexane or ethyl acetate, from compounds which are solid at room temperature and pressure. However, careful application also allows for the removal of a solvent from a sample containing a liquid compound, if there is minimal co-evaporation (azeotropic behavior) and a sufficient difference in boiling points at the chosen temperature and reduced pressure.
Ai SolventVap 2.6-gallon/10L (evaporating flask capacity)
series rotary
evaporators come with all PTFE valves for solvent-resistant
operations. We also lowered the height of assembled unit, for easy installation
and ease of use and storage. Also come with them are vertical glassware and
digital temperature/rotation control. Its optimized bath volume allows for rapid
heat-up times. The condenser unit has specially designed glass tubes that
utilize surface area extremely efficiently. That’s why our SolventVap
evaporators consistently deliver reliable and reproducible process results that
are usually reserved for more costly systems. Another important aspect of the
SolventVap is the safety features, which includes dry-run protection, water
bath over-temperature shut-off protection, and fuse protection.
Rotary evaporator features a specially designed motor and
worm gear, which provides constant rotation at speeds from 10 to 130 rpm. As
the flask containing the solvent is rotated, it continually transfers a thin
layer of liquid over the entire inner surface. This gives a very large surface
area for evaporation, which is caused by the gentle heating from the water
bath. The rotating system is fitted with a special seal that allows the
apparatus to be placed under vacuum, effectively reducing the boiling point of
the solvents and removing the vapor phase, making the process much more
efficient. Each unit is also equipped with an easy-to-use vacuum release and a
continuous feed system, which allows solvent to be constantly drawn into the
rotating flask without needing to stop the operation.
Digital water bath operates from ambient temperature to 99°C
(210°F) with PID temperature control stepping at 0.1°C increments. Heating
coils are located directly inside the pan for the most efficient heating
possible. A built-in overheat protector will shut down power, should the controller
fail.
Standard Glassware Set includes 2.6 gallon (10 liters) round-bottomed
evaporating flask, 1.3 gallon (5 liters) round-bottomed receiving flask, and
vertical condenser. Rotary evaporators with vertical glass condenser are great
for distillation of solvents with higher boiling points.
Features
· Water bath cover enhances safety by protecting evaporating flask and the material inside; it gives you uniform temperature inside evaporation flask as well as energy saving by reducing heat loss. It also creates a better lab environment by preventing heat and humidity from escaping.
· Solvent-resistant PTFE and Viton gaskets, ensuring long time operation.
· Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation.
· Downward-condensing vacuum connection design ensures safe vacuum operation.
· Motorized water bath lifting for precise control.
· Easy, straight-forward visual operation with digital speed and temperature display.
· PID temperature controller ensures accurate temperature control is maintained.
· One year warranty on rotary evaporator except for glassware and all sealing gaskets.
Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.
Specifications
|
Electrical requirements |
220V 50/60Hz single phase, 17.3A, 3800 watt (rotation motor: 300 watts) |
|
Glass material |
High borosilicate glass 3.3 |
|
Evaporating flask |
Capacity: 2.6 gallon (10 liters or
0.35 cu ft) |
|
Receiving flask |
1.3 gallon (5 liters or 0.18 cu ft) |
|
Condenser |
Glassware: Main + auxiliary
triple-circulating cold traps, vertical |
|
Working environment |
5 to 95°F |
|
Water bath |
Temperature range: ambient to 99°C
(210°F) |
|
Vacuum |
Ultimate vacuum level: < 3 torrs |
|
Swivel caster |
Four, built-in with locks |
|
Safety |
Dry-run, over-temp shut-off, built-in circuit breakers |
|
Weight & dimensions |
Shipping weight: 200 Lb (evaporator),
100 Lb (glassware) |
|
Certification |
UL, CSA |
SE26ps Standard Package
|
Part description |
Quantity |
|
PolyScience 220V 6160 -10°C 4.2L 1HP recirculating chiller with turbine pump |
1 set |
|
ULVAC 220V DTC-41 1.6 cfm 7.5 torr 2-head diaphragm pump and vacuum hose |
1 set |
|
Ai SolventVap 2.6-gallon rotary evaporator and water bath |
1 set |
|
Vertical main and auxiliary condensers, glass |
2 pcs |
|
2.6G/10L round shaped rotating evaporating flask, glass |
1 pc |
|
5L receiving flask with detachable drain port |
1 pc |
|
Three-way tee vapor buffering flask, glass |
1 pc |
|
Glass vapor duct with seal (pre-installed) |
1 set |
|
PTFE vacuum sealing kit (pre-installed) |
2 pcs |
|
Receiving flask glass vacuum port with PTFE open/close valve |
2 sets |
|
Glass material feeding port with PTFE open/close valve |
1 set |
|
PTFE extension feeding hose |
1 pc |
|
Stainless steel pole and mechanical vacuum gauge |
2 pcs |
|
Reinforced food grade vacuum and chilling tubing |
15 ft |
|
Rubber-wrapped condenser & receiving flask support and bracket |
3 pcs |
|
Flask quick clamp & centering ring |
7 sets |
|
GL18 x 5, 3/8" fluid port for C30 chillers x 2 |
See left |
|
Evaporating flask cap spanner, allen key & hex screws |
1 set |
|
Ai plexiglass cover for SolventVap 10L |
1 pc |
|
User's manual |
1 pc |
1. We supply machines with battery technology support.
2. We supply full set of lithium battery equipment for lab research, pilot scale research and production line.
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damage part for you for free.
Subscribe to us
ONLINE
Louis@lithmachine.com
+0086 15959378975
