ItemNo :
LITH-DYG-703BH1-Φ800MOQ :
1Compliance:
CEWarranty:
2 yearsDelivery Time:
5 daysEmail :
Louis@lithmachine.comAuto Rolling Press Machine/Cell Calender (Dia 800*950mm) For Li Ion Battery Production
A.Equipment functions:
1. This set of equipment is connected by a standard roller aligning machine, which is suitable for the high-speed tablet pressing process of continuous pole coating. This set of equipment is mainly composed of a single station unwinding part, a front and rear tension stretching part, an oil pressure roller aligning host part, an online thickness measurement system, and a single station rewinding part.
1) This machine has a mouth shaped integrally cast 45# steel frame, large slider structure, large bearing capacity, small deformation, large rolling force and high rolling speed;
2) By using the constant pressure limited gap rolling method, the battery pole pieces with longitudinal blank and continuous coating can be rolled continuously;
3) Scraper device with roller surface cleaning mechanism;
4) With servo motor unwinding device;
5) Equipped with manual tape receiving platform;
6) With pole slice trimming mechanism;
7) With tension buffer mechanism;
8) It has the function of dust and iron removal by pole brush;
9) With front tension stretching and rear tension stretching devices;
10) The hydraulic system adjusts the lift of the oil cylinder through the human-computer interface touch screen to drive the lift of the roll;
11) Adjust and change the pressure of the roll cylinder through the man-machine interface, control the constant pressure, and the man-machine interface displays the actual pressure;
12) The up and down movement value of the roll is displayed on the man-machine interface screen;
13) The roll surface is plated with hard chromium, and the thickness of chromium layer after grinding is ≥ 120um;
14) Rolling speed ≥ 50m/min;
15) Roll removal device;
16) Laser on-line thickness measurement function;
B. Applicable material conditions:
1、Incoming material specification (Unit:mm)
Specifications
Material |
incoming |
Coil width |
Thickness |
Internal diameter |
Maximum outside diameter |
Max capacity |
Positive electrode |
Coil material |
300~850 |
0.060~0.300 |
6〞 |
Φ800 |
800kg |
Negative pole |
Coil material |
300~850 |
0.065~0.300 |
6〞 |
Φ800 |
800kg |
Positive foil area |
—— |
300~850 |
0.009~0.035 |
—— |
—— |
—— |
Negative foil area |
—— |
300~850 |
0.006~0.035 |
—— |
—— |
—— |
1. Material system: positive pole: lithium iron phosphate system / ternary system / lithium manganate system; negative pole: Graphite System / silicon carbon system;
2. Coating method: continuous single banner coating, continuous multiple zebra coating, single gap coating, multi gap coating, etc;
3. Foil specification: copper aluminum foil / carbon coated copper aluminum foil;
C. Installation requirements for whole line equipment :
1) Power requirements: 380V/50hz, power about 72KW;
2) Compressed air: pressure 0.5mpa~0.7mpa, flow: 0.04m3/min;
3) The total weight of the equipment is about 32T. The ground bearing requirements for the installation of the roller machine host are >8T/m2, and the ground bearing requirements for the unwinding and rewinding installation are >2.5 T/m2.
4) Overall dimension of connecting equipment (mm): length * width * height (8000*4720*3200), subject to site layout.
D.Equipment performance index:
No. |
Entry name |
Performance index |
Remarks |
1 |
Production speed of complete equipment |
≥50m/min |
Acceptance speed |
2 |
Pole or foil type |
Non ferrous precious metals such as copper or aluminum |
|
3 |
Roll specification |
φ800*950mm |
|
4 |
Maximum rolling force |
400T |
|
5 |
Effective rolling width |
850mm |
|
6 |
Evenness of pole piece after rolling |
≤±0.002mm(Required incoming accuracy≤±0.003mm) |
|
7 |
Press roll layout |
Vertical arrangement of two rollers |
|
8 |
Roll diameter of each guide roll of roller press |
≥φ120mm |
|
9 |
Precision of each guide metal roll of roller press |
Diameter: ≤± 0.1mm, roughness: ≤ 0.8 μ m. Circular runout: ≤ 0.04mm/m; |
|
10 |
Rubber roll accuracy of roller press |
Diameter: ≤± 0.2mm, cylindricity: ≤ 0.2mm, radial runout: ≤ 0.3mm/m; |
|
11 |
Roll diameter of each driving roll of roller press |
≥φ120mm |
|
12 |
Assembly accuracy between metal rolls of roller press |
Parallelism: ≤ 0.08mm, levelness: ≤ 0.06mm |
|
13 |
Assembly accuracy of rubber roll and metal roll of roller press |
Parallelism: ≤ 0.2mm, levelness: ≤ 0.1mm (the bearings used for each guide roll and drive roll of the roller press are Japanese NSK or Swedish SKF brand bearings) |
|
14 |
Safety protection function |
Mechanical interlocking and self-locking / safety warning signs / emergency stop switch buttons / protective covers, etc. signs shall be pasted at dangerous places and safety protection devices shall be installed |
|
15 |
Qualification rate of products produced by equipment |
≥99.5% |
|
16 |
Time rate |
>98% |
|
17 |
Rolling thickness CPK |
≥1.33 |
|
E.Configuration of main equipment components:
No. |
Name |
Brand |
1. |
Roll material |
Cr5; Sinosteel Xingtai roll Co., Ltd. and provide inspection report |
2. |
Roller bearing |
Wafangdian |
3. |
Roll motor / reducer |
Dongli, Guomao |
4. |
PLC |
Panasonic, Omron |
5. |
Touch screen |
Proface, Kunlun state |
6. |
Servo motor |
Mitsubishi, Huichuan |
7. |
Linear guide rail |
HIWIN |
8. |
Other bearings |
NSK |
9. |
Solenoid valve |
SMC、CKD |
10. |
Electrical components |
Schneider, Chint |
11. |
Electric proportional valve |
SMC、CKD |
12. |
Deviation correction control system |
Puliyuan, dongdeng |
13. |
Frequency converter |
Mitsubishi, Danfoss |
14. |
Main roll drive motor |
Dongli, Guomao |
15. |
sensor |
Omron、KEYENCE |
16. |
Coil diameter detection ultrasonic sensor |
Banner、Beijiafu |
17. |
Pneumatic components |
SMC、CKD |
18. |
Light sensor and displacement sensor |
Omron、KEYENCE |
19. |
Tension controller |
kortis |
20. |
Laser thickness gauge |
Dacheng, Shuangyuan |
21. |
Hydraulic system |
Vick hydraulic, Aili |
F.Equipment matching:
The pole strip continuous rolling production line is mainly composed of single station unwinding, edge cutting, dust removal device, oil pressure roller aligning machine, front and rear tension stretching device, laser online thickness measurement system, single station rewinding, electric control system, hydraulic system, suspension operation station, deviation correction device, electric control cabinet, etc.
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damaged part for you for free.
DELIVERY TIME:15-20 days after confirming the order, detail delivery date should be decided according to
production season and order quantity.