Email:Louis@lithmachine.com
ItemNo :
LITH-PP-25MOQ :
1Delivery Time:
2 daysEmail :
Louis@lithmachine.com152um Thick Aluminum Laminated Film
SPECIFICATION
|
Layers from outside (Shiny) to inside (Mat)
|
Polyamide (JIS Z1714): 0.025mm (+-0.0025mm) |
|
Thickness: |
152μm |
|
Width |
400mm |
|
Length |
10m |
|
Surface quality |
Mat finish |
|
Pinholes |
Subject to the applicable aluminum foil standard |
|
Impurity |
1mm or less in diameter |
|
Fish Eye |
2mm or less in diameter (clear),1mm or less in diameter (colored) |
|
Molding Depth |
≥5.0mm |
|
Electrical Insulating |
Good |
|
Hot Sealing Coniditon |
180-190°C |
|
Moisture Vapor / O2 Transmission Rate |
200ppm / 5 years |
|
Laminate Strength |
Nylon/Al more than 2N/15mm Al/CPP more than 5N/15mm |
|
Heat Seal Strength |
More than 22.5N/15mm wide at 200℃ x 0.2Mpa x2 sec by TMAX heat sealing |
|
Solvent Retention |
Less than 5mg/m2 |
|
Appearance |
Within the sample of the limit |
|
Slip Factor |
CPP/CPP less than 1.0 |
|
Application Notes |
Click the picture below to see the finished polymer Li-Ion battery made by heated sealer |
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damaged part for you for free.
DELIVERY TIME:15-20 days after confirming the order, detail delivery date should be decided according to
production season and order quantity.
Lab Coin Cell Pressure Adjustable Controlled Electric Crimper For Battery
Subscribe to us
ONLINE
Louis@lithmachine.com
+0086 15959378975
