Pouch Cell 8 Channels Battery Tester Analyzer With Laptop & Software

ItemNo :
LITH-BST8-5V6A
MOQ :
1
Compliance:
CE
Warranty:
2 years
Delivery Time:
5 days
Email :
Louis@lithmachine.com

Contact Now

Product Details

Pouch Cell 8 Channels Battery Tester Analyzer With Laptop & Software

1. This tester can analyze polymer and cylindrical batteries from 0.1mA to 6 A, up to 5V.

2 The battery test system provides most applications in battery testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing and etc.

Specifications

Input Power		AC 220V ±10% / 50Hz
Resolution		AD:16bit;DA:16bit
Input Resistance		≥1MΩ
Input Power		425W
Channel Features		Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure
Channel Control Mode		Independent Control
Voltage	Per Channel Voltage Range	Charge:25mV~5V;Discharge:1.0V~5V
	Accuracy	± 0.05% of FS
	Stability	0.05% of FS
Current	Per Channel Current Range	Range1:0.5mA~0.1A;Range2:0.1A~6A
	Accuracy	± 0.05% of FS
	CV cut-off current	Range 1: 0.2mA Range2: 12mA
	Stability	0.05% of FS
Power	Per Channel Output Power	30W
Power	Stability	± 0.1% of FS
Time	Current Response Time	The Current gets to 6A Hardware Response Time is 1ms
Time	Step Time Range	0.1s≤Single Step Time Range≤365*24 h, Time Form Support 00:00:00(h,min,s)
Data Recording	Record Condition	Time:100ms
		Voltage U:10mV
		Current I:Range 1: 0.2mA Range2: 12mA
	Record Frequency	10Hz
Charge	Charge Mode	Constant Current Charge,Constant Voltage Charge, CC-CV Charge ,CP-Charge
Charge	End Condition	Voltage,Current,Relative Time,Capacity,
Discharge	Discharge Mode	Constant Current Discharge CP-D CR-D
Discharge	End Condition	Current,Current,Relative Time,Capacity,
Pulse Model	Charge	Constant Current,Constant Power
	Discharge	Constant Current,Constant Power
	Min Pulse Width	500ms
	Pulse Number	Single Pulse Step Support 32 different Pulse
	Charge r To Discharge	One Pulse Step Can Support Continuous Charge And Discharge Change
	Stop Condition	Voltage, Relative Time
DCIR Testing	Support Custom Access Point And Count The DCR
Cycle	Loop Measure Range	1~65535 times
	Max Steps Per Loop	254
	Nested Loop	Nested loop Function,Max Support 3 Layers
Protection	Software Protection	Power-down Data Protection
Protection	Software Protection	Setting Protection Condition,Setting Parameter:Low Voltage limit,Upper Voltage limit,Low Current limit,Upper Current limit,Delay Time
Voltage and Current Testing Sample		4-wire connecting
Noise		<85dB
Data Management		MySQL Database
Communication Means		TCP/IP Protocol
Data Output		EXCEL,TXT
Communication Interface		Ethernet Port
Main Channels		8

Channels

Eight independent programmable channels

Each channel can set different working modes and functions independently

Programs &

Software

1.1 The software is included to set various working modes for

measuring capacity and life cycle for all types of rechargeable batteries

1.2 Working modes Include constant current discharge, constant current charge,

constant voltage charge, rest, cycles, etc.

1.3 Limited threshold conditions include voltage, current, time, capacity,

negative voltage slope, etc.

1.4 With real-time monitoring windows and integrated graph/data windows,

the testing process can be observed more directly and efficiently

1.5 During the test, the software will provide instructions and warnings for assistance

Test Reports and

Curves for analysis

2.1 Different types of curves can be created by software base on user definition.

(Voltage-time curve, current-time curve, capacity-voltage curve, loops

times-charge/discharge capacity curve, loops times charge/ discharge efficiency curve, etc)

2.2 Data reports are created by software.

User can easily compare the performance of the batteries tested in channels both visually

and statistically

Protection and

Auto-recover

If power failure occurs during testing, the system will shutdown all operating channels.

Once power is recovered, the system will automatically resume those stopped channels

and ensure that the test is normally conducted, so that no cases will lose any data.

Battery Holders

8 alligator clips with cable for universal connecting

8 spring load holders with adjustable length for measuring cylinder battery upto 70mm(H)

8 Polymer battery tester clamps for pouch cell testing

Warranty

One Year limited warranty with lifetime support

Product Dimensions

485mm(L) * 508mm(W) *263mm(H)

battery tester

Pouch Cell Process: Tube Furnace/ Muffle Furnace→ Vacuum Mixing→ Electrode Coating→ Roll press→ Electrode Cutting→ Vacuum Drying→ Cases Forming→ Top&Side Sealing→ Electrolyte Filling→ Vacuum Sealing→ Battery Analyzer