Email:Louis@lithmachine.com
ItemNo :
LITH-ITT-1500SMOQ :
1Delivery Time:
5 daysEmail :
Louis@lithmachine.comLab Vacuum Planetary Stirring and Defoaming Mixer with Two 1.5L Cups
Parameter
|
Container capacity |
1500ml*2 cups 70CC*2 sticks |
|
Optimum capacity of agitator |
50-1000ml*2 cup |
|
Operation method |
Human-computer interface + button start. |
|
Revolution and rotation speed |
Revolution 100-2000RPM, rotation and revolution ratio 0.9 |
|
Vacuum gauge |
SMC or Panasonic (Panasonic) vacuum gauge objective and true display vacuum degree. |
|
Vacuum pump |
German technology Small Diamon grade vacuum pump, built-in forced lubricating oil pump, full lubrication, reliable performance, low noise, with our company's unique 4-stage filtration, to meet the requirements of clean room. |
|
Spindle |
S136 mirror surface die steel sealing position quenching HRC58~60°, mirror surface grinding at the sealing ring position |
|
Sealing ring |
DuPont's polymer graphene sealing ring is super wear-resistant and maintains long-term high vacuum |
|
Arm |
The United States importd aviation magnesium aluminum 7075, the overall machining center distance is ±0.02, and the size is stable for a long time.Modular structure, high interchangeability, very convenient maintenance. |
|
Transmission |
Adopt spiral bevel gear transmission, stable transmission, low noise and long service life |
|
Stored program |
5 stored programs (5 steps can be set for each program) |
|
Protect |
Door cover, fault, overload |
|
Power, power, voltage |
Single phase;,≦1.5 KW; 220V |
|
After sales |
The whole machine is guaranteed for one year and lifetime maintenance! |
Diagram of the working principle of non-contact stirring：
The outer circle arrow is the revolution direction of the equipment, the material cup is placed in the cup holder at an angle of 45 degrees, and the small circle arrow is the rotation direction of the material cup. slurry.
Our stirring method: no stirring rod, only need to change the container when stirring different materials. Easy to clean, just clean the container. Some customers use disposable containers directly. We provide customers with fixtures for disposable cups within the allowable range of size.
SMC vacuum gauge shows true vacuum
Spindle: Adopt Swiss ASSAB S136 mirror die steel, after multiple heat treatment, the overall hardness reaches HRC62 degrees. The shaft is ground as a whole, with a full runout of no more than 1 wire. The sealing surface is then mirror-polished to achieve a mirror-like effect with a surface roughness of 0.02um. The friction coefficient is extremely low, and the self-super-wear-resisting wear of the sealing ring is very small, achieving high sealing performance with a long life. This is one of the magic weapons for many of our customers to keep the negative pressure above -98Kpa after using it for several years.
Sealing ring: The super wear-resistant sealing ring of Bayer company in Germany is adopted, and the wear resistance capacity can reach the line speed of 40M/S. The line speed of our equipment is only 4M/S at 2000 rpm. The pressure can withstand 20KG/c㎡. This is the second magic weapon for many of our customers to maintain negative pressure above -98Kpa after using it for several years.
Vacuum pump: German technology Small Diamon grade vacuum pump, built-in forced lubricating oil pump, sufficient lubrication, reliable performance, low noise, with our company's unique 4-stage filtration, to meet the requirements of clean room.
Gear: It adopts the structure of automobile spiral bevel gear, which has stable operation, low noise and long service life.
Swivel arm: It adopts the whole swivel arm, which is all made of magnesium-aluminum 7075 imported from the United States, which ensures the accuracy and later stability of the product, and the center error is not greater than ±0.02. High interchangeability, the same type of machine arm can be interchanged freely, easy maintenance.
Vacuum stirring and defoaming machine: high vacuum degree, long life (the vacuum degree of the machine that has been maintained and maintained on time will not be less than 5% in 10 years, the vacuum degree will be maintained below -95Kpa, the more negative the vacuum degree, the higher the vacuum degree), Easy maintenance: The overall material processing of the rotating arm is highly interchangeable, and it is easy for customers to replace parts by themselves, or they can send them back to our company for replacement parts. After replacing the parts, the effect is like a new machine.
|
Part Name |
Brand |
|
Touch screen |
SamKoon |
|
Programmable Logic Controller (PLC) |
OMRON (OMRON) |
|
Motor driver |
Mitsubishi (Mitsubishi) |
|
Relay |
IDEC (Izumi Electric) |
|
Vacuum gauge |
SMC or Panasonic (Panasonic) |
|
Vacuum solenoid valve |
SMC |
|
Switching power supply |
MW (Mean Well) |
|
Vacuum pump |
AKS (AKS) two-stage pump SD-240 (>4L/sec,>240L/min, 14~16M2/hour); absolute limit pressure (partial pressure 5*10 -2Pa and 0.05Pa); absolute limit Pressure (full pressure 4*10 -1Pa and 0.4Pa); machine digital display relative value vacuum degree maximum -100.2KPa; |
|
Spiral bevel gear, helical gear |
Customized MC901 or oily nylon |
|
Arm |
7075 Overall processing of aluminum plate |
|
Mixing cup |
1500ML 900ML 300ML |
|
Axis of rotation |
Yishengbai S136 mirror die steel |
|
Rotary seal |
Bayer PTFE graphite sealing ring |
Standard 1500ML blender jar
1500ML to 900ML transition sleeve
1500ML to 300ML transition sleeve
Optional:
1000ML Disposable Cup Fixture
Optional:
1500ML to 70CC, 55CC, 50CC, 30CC syringe, 10CC plus transition sleeve
50ML1:1 Two-Component Fixture
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damaged part for you for free.
DELIVERY TIME:15-20 days after confirming the order, detail delivery date should be decided according to
production season and order quantity.
Subscribe to us
ONLINE
Louis@lithmachine.com
+0086 15959378975
