Feature

The lithium battery aging cabinet is mainly used for testing the charging and discharging cycle of finished lithium batteries. The testing items of Battery Pack Aging Machine include: battery charging protection voltage, discharging protection voltage, capacity, etc. The equipment has charging, discharging, shelving, and cycling four testing steps. The battery can be tested according to the set process by editing the corresponding steps.

Basic performance:

♦Charging function: with constant current and constant voltage charging function
♦Discharge function: with constant current discharge function
♦Charge and discharge interface: fully meet the requirements of the same port and separate port for charging and discharging the battery pack, that is, 2 wires (P+ P-) and 3 wires (P+ P- C-), and can age the positive electrode to protect the negative plate from discharging Protection type power tool battery (CH+ P+ P-)

♦Check voltage protection: by charging and discharging the battery, can check whether the battery's charge protection and discharge protection work.

♦Record the charge and discharge capacity: charge and discharge the battery, and record the charge and discharge capacity of the battery.

♦Safety protection: anti-reverse connection protection function; voltage upper and lower limit setting protection; safe discharge current protection.

♦Serial port connection mode: If the machine is single or less than 3, it can be connected to the PC through the serial port, which can reduce the complexity of using the equipment.

♦Network connection mode: If there are more than 3 instruments, the network connection mode can be used. The PC computer only needs to provide a network port to control less than 60 instruments.

♦Control system: The software system of the aging instrument adopts the classic and mature C/S mode, and the communication mode is serial port and network.

♦Management software: It can store test data, which greatly facilitates the staff to query and export data online. According to the battery bar code, time, and device number, you can view the charge and discharge aging curve, and you can also export the curve.

Specifications

Input power:AC 220v+/-10%/50Hz
Voltage:       10-100V
Current:       charge range:0-20000mA
                    discharge range:0-40000mA
Charge:        min10mA
Discharge power : below 1400W
Time :  Patrol time :    under 5s
            Timer range :  0-999hours /step